The Hawk High Performance Auto Cutting Line jikọtara ya na HKJ900 Multi Rip saw, Vacuum Steering Machine na HKC6 Cross Cut saw.The Hawk High Performance Auto Cutting Line dabara adaba maka ngwa ngwa dị elu, slicing ziri ezi na nhazi nke nnukwu efere, yana dabara adaba maka obere ọkpụrụkpụ ihe dị ka ala SPC dryback na ala LVT kama igwe ọkpọ.The ọhụrụ hụrụ agụba nke HKJ900 na-akpụ akpụ na onwe ime mgbanwe ngwaọrụ na-aghọta ngwa ngwa nnọchi nke agụba na ngwa ngwa ntughari nke ala nkọwapụta.The akpaka mmepụta njikọ mode nwere ike na-aghọta ọnwụ ọnwụ nke 40 mita kwa nkeji na budata ibelata mmepụta na-eri
The Hawk High Performance Auto Cutting Line:
1. Elu arụmọrụ, ọsọ bụ 15-18 pcs / min.
2.High ziri ezi, kwụ ọtọ nke panel na-achịkwa n'ime 0.05-0.10mm / m.
3.Separate Ọdịdị maka saw agụba na moto, otú ọ nwere ike ngwa ngwa na mfe ịgbanwee dị iche iche ngwaahịa nkọwa.
4.Touch ihuenyo sets, servo moto na-achịkwa ije nke saw agụba, mfe ọrụ, elu nkenke.
5.Cutting ebu adịghị mkpa, ọ nwere ike ịzọpụta na-eri na edozi oge.
6.Cut na ngwaahịa nke punch pịa enweghị ike hazie (Gụnyere kpọmkwem ngwaahịa mere site ọkpụrụkpụ, ogologo na hardness).
7.Batch usoro, obere mpaghara ọrụ.
8.Realize automation nke ngwaahịa na-aga n'ihu, belata ọnụ ọgụgụ ọrụ.
| HKJ900 | HKC6 | |
| Spindle moto ike | 5,5kw | 4.0kw |
| Hụrụ agụba moto ike | 8*5.0kw | 3*5.0kw |
| Hụrụ agụba moto ọsọ | 2500 - 5200rpm (ntụgharị ugboro ugboro) | 2500 - 5200rpm (ntụgharị ugboro ugboro) |
| Hụrụ ọnọdụ mgbanwe oghere agụba | Metụ ihuenyo dijitalụ mgbanwe | Metụ ihuenyo dijitalụ mgbanwe |
| Hụrụ ngbanwe nhazi oghere agụba | ± 0.015mm | ± 0.015mm |
| Hụrụ dayameta agụba | 300-320 mm | 300-320 mm |
| Dayameta nke oghere n'ime agụba | 140mm | 140mm |
| Hụrụ agụba ọkpụrụkpụ | 1.8-3 mm | 1.8-3 mm |
| Ndozi nso nke ịkwọ agụba ebuli | -10 - 70mm (Were ụgbọ elu na-arụ ọrụ dị ka ntụaka) | -- |
| Hụrụ agụba ebuli mgbanwe mode | Metụ ihuenyo dijitalụ mgbanwe | -- |
| Ọsọ efere ịkwọ ihe | 5 - 40m/min (ntụgharị ugboro ugboro) | 5 - 40m/min (ntụgharị ugboro ugboro) |
| Ọkpụrụkpụ efere ịwa osisi | 2-20 mm | 2-20 mm |
| Kachasị obosara nke efere saw | 1350 mm | 600mm |
| Ogologo ogologo efere ahụrụ | 500-2400mm | 2400mm |
| Nnukwu arọ nke akụrụngwa | ≈5.5T | ≈3.5T |