• ibe_isi_bg

Igwe Hawk Atọ Rip Saw

Nkọwa dị mkpirikpi:

A na-ejikarị igwe Hawk Atọ Rip Saw eme ihe maka ịkpụchasị osisi ahụ n'ime akụkụ abụọ ma ọ bụ atọ, dị ka ala laminate, ala osisi siri ike, ala bakelite, bọọdụ plastik na mbadamba ndị ọzọ, bụ igwe dị mkpa maka nrụpụta ala.


Nkọwa ngwaahịa

Mkpado ngwaahịa

Usoro nka

Ike moto: 3*4KW
moto nri: 1.5KW
Ọsọ kacha elu: 2980 (r/min)
Nkọwapụta agụba: 300mmX3.2mmX2.2mmX40mm
Hụrụ ọsọ: Mgbanwe 15 ~ 35(m/min)
Ọkpụrụkpụ nkụ: 3-25mm
Akụkụ: 1160mm * 2960mm * 1140mm
Arọ: 2.1 (T)

The Hawk Machinery Three Rip Saw bụ nke nwere ahụ gbachiri nke ọma yana ikpo okwu nri na ịwụsa.The saw agụba ozugbo n'ịnyịnya na isi aro nke moto, nri usoro na-anya site kemeghi agbanwe ọsọ moto, na nri mbanye roller nwere ike gbanwee ọnụ, dum igwe nwere kọmpat Ọdịdị na elu imewe.

Igwe Hawk Atọ Rip hụrụ atụmatụ dị elu:

1, nkà na ụzụ dị elu, iji 3D software imewe, nhazi ụlọ ọrụ nhazi, na ọkwa nke ụlọ;

2, elu nkenke, hụrụ onuete straightness dị mma, nwere ike izute chọrọ nke nṅomi osisi n'ala, izugbe laminate ala hụrụ nwere ike nweta mmetụta nke onuete ogologo, na-azọpụta ihe;

3, ọrụ dị mfe, dị ka ọkpụrụkpụ nke ala iji dozie ohere dị n'etiti mpịakọta elu na nke ala, dị nnọọ ịkwanye aka iji mezue nhazi nke mpịakọta nrụgide;

4, anọ hụrụ agụba moto spacing site ịghasa mgbanwe, adaba na ngwa ngwa, ezi ọnọdụ;

5, nchekwa gburugburu ebe obibi, a na-emechi igwe dum kpamkpam, a na-ewepụ uzuzu a na-emepụta ozugbo site na sistemu uzuzu uzuzu, ebe ọrụ dị ọcha.

Anọ, ndị isi oru egosi:

Isi moto ike: 4×3Kw

Nnukwu moto ọsọ: 2980 RPM

Dayameta agụba: 300mm

Ọsọ nri: mgbanwe 25 ~ 40m / min

Akụkụ igwe: 3.3m×2m×1.1m

Ibu igwe: 1.9T

Ike moto: 3 * 4KW moto nri: 1.5KW Oke kacha ọsọ: 2980 (r / min) Hụrụ nkọwapụta: 300mmX3.2mmX2.2mmX40mm Hụrụ ọsọ: Agbanwe 15 ~ 35 (m / min) Ọkpụkpụ: 3-25mm Akụkụ: 1160mm * 2960mm*1140mm arọ: 2.1(T)

High Performance akpaaka Ịcha ahịrị

Okwu mmalite

The Hawk High Performance Auto Cutting Line jikọtara ya na HKJ900 Multi Rip saw, Vacuum Steering Machine na HKC6 Cross Cut saw.The Hawk High Performance Auto Cutting Line dabara adaba maka ngwa ngwa dị elu, slicing ziri ezi na nhazi nke nnukwu efere, yana dabara adaba maka obere ọkpụrụkpụ ihe dị ka ala SPC dryback na ala LVT kama igwe ọkpọ.The ọhụrụ hụrụ agụba nke HKJ900 na-akpụ akpụ na onwe ime mgbanwe ngwaọrụ na-aghọta ngwa ngwa nnọchi nke agụba na ngwa ngwa ntughari nke ala nkọwapụta.The akpaka mmepụta njikọ mode nwere ike na-aghọta ọnwụ ọnwụ nke 40 mita kwa nkeji na budata ibelata mmepụta na-eri
The Hawk High Performance Auto Cutting Line:
1. Elu arụmọrụ, ọsọ bụ 15-18 pcs / min.
2.High ziri ezi, kwụ ọtọ nke panel na-achịkwa n'ime 0.05-0.10mm / m.
3.Separate Ọdịdị maka saw agụba na moto, otú ọ nwere ike ngwa ngwa na mfe ịgbanwee dị iche iche ngwaahịa nkọwa.
4.Touch ihuenyo sets, servo moto na-achịkwa ije nke saw agụba, mfe ọrụ, elu nkenke.
5.Cutting ebu adịghị mkpa, ọ nwere ike ịzọpụta na-eri na edozi oge.
6.Cut na ngwaahịa nke punch pịa enweghị ike hazie (Gụnyere kpọmkwem ngwaahịa mere site ọkpụrụkpụ, ogologo na hardness).
7.Batch usoro, obere mpaghara ọrụ.
8.Realize automation nke ngwaahịa na-aga n'ihu, belata ọnụ ọgụgụ ọrụ.

Nka nka

  HKJ900 HKC6
Spindle moto ike 5,5kw 4.0kw
Hụrụ agụba moto ike 8*5.0kw 3*5.0kw
Hụrụ agụba moto ọsọ 2500 - 5200rpm (ntụgharị ugboro ugboro) 2500 - 5200rpm (ntụgharị ugboro ugboro)
Hụrụ ọnọdụ mgbanwe oghere agụba Metụ ihuenyo dijitalụ mgbanwe Metụ ihuenyo dijitalụ mgbanwe
Hụrụ ngbanwe nhazi oghere agụba ± 0.015mm ± 0.015mm
Hụrụ dayameta agụba 300-320 mm 300-320 mm
Dayameta nke oghere n'ime agụba 140mm 140mm
Hụrụ agụba ọkpụrụkpụ 1.8-3 mm 1.8-3 mm
Ndozi nso nke ịkwọ agụba ebuli -10 - 70mm (Were ụgbọ elu na-arụ ọrụ dị ka ntụaka) --
Hụrụ agụba ebuli mgbanwe mode Metụ ihuenyo dijitalụ mgbanwe --
Ọsọ efere ịkwọ ihe 5 - 40m/min (ntụgharị ugboro ugboro) 5 - 40m/min (ntụgharị ugboro ugboro)
Ọkpụrụkpụ efere ịwa osisi 2-20 mm 2-20 mm
Kachasị obosara nke efere saw 1350 mm 600mm
Ogologo ogologo efere ahụrụ 500-2400mm 2400mm
Nnukwu arọ nke akụrụngwa ≈5.5T ≈3.5T

  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya

    Ngwaahịa ndị emetụtara

    • Igwe igwe Hawk Multi Rip saw

      Igwe igwe Hawk Multi Rip saw

      Nka na ụzụ isi ike moto: 18.5KW moto nri: 1.5KW Ọsọ kachasị: 3200 (r / min) Nkọwapụta agụba: 300mmX3.2mmX2.2mmX (80-100)mm Hụrụ ọsọ: Mgbanwe 15 ~ 35 (m / min) Mpempe akwụkwọ kwụ ọtọ: <0.2mm/m Saw agụba dayameta: Ф80 ~ Ф100mm ọkpụrụkpụ ịkwọ ụgbọ: 3-25mm Akụkụ: Ogologo 2.2X obosara 1.9X elu 1.2 (m) Ibu: 2.6 (T) The mach...