Igwe igwe Hawk Multi Rip saw
| Isi ike moto: | 18.5KW |
| moto nri: | 1.5KW |
| Ọsọ kacha elu: | 3200 (r/min) |
| Nkọwapụta agụba: | 300mmX3.2mmX2.2mmX (80-100) mm |
| Hụrụ ọsọ: | Mgbanwe 15 ~ 35(m/min) |
| Mpempe akwụkwọ kwụ ọtọ: | <0.2mm/m |
| Dayameta nke agụba: | 80 ~ 100mm |
| Ọkpụrụkpụ nkụ: | 3-25mm |
| Akụkụ: | Ogologo 2.2X obosara 1.9X elu 1.2 (m) |
| Arọ: | 2.6 (T) |
Igwe ahụ nwere ahụ gbachiri nke ọma yana ikpo okwu nri na ịwụsa.The saw agụba ozugbo n'ịnyịnya na isi aro nke moto, nri usoro na-anya site kemeghi agbanwe ọsọ moto, na nri mbanye roller nwere ike gbanwee ọnụ, dum igwe nwere kọmpat Ọdịdị na elu imewe.
Isi atụmatụ:
1, nkà na ụzụ dị elu, iji nhazi ngwanrọ atọ, nnukwu ụlọ ọrụ nhazi gantry, na ọkwa ọkwa ụlọ;
2, elu nkenke, hụrụ seam straightness dị mma, nwere ike izute chọrọ nke nṅomi osisi n'ala, n'ihi na general laminate flooring na SPC n'ala sawing nwere ike nweta ezi straightness, ihe na-azọpụta mmetụta;
3, nchekwa gburugburu ebe obibi, a na-emechi igwe dum kpamkpam, a na-ewepụ uzuzu a na-emepụta ozugbo site na sistemu uzuzu uzuzu, ebe ọrụ dị ọcha.
Nka nka:
1. Nha ala:
- kacha obosara: 1300 mm.
- ọkpụrụkpụ: 6-20 mm.
2. Nkọwa akụrụngwa ntọala:
- elu nkenke chrome plated spindle nwere dayameta spindle nke 80 mm na njikọ abụọ; dayameta spindle bụ 100 mm mgbe ejiri aka uwe hydraulic shaft.
- moto spindle 18.5kw.
- elu pịa ihe na-akpụ akpụ bụ rọba rọba, na ala ala bụ igwe nchara chromium siri ike.
- ngwaọrụ iwepụ uzuzu dị n'ime.
- ịcha agụba, mgbochi - iti na tightening ngwaọrụ.
- Central vacuuming ngwaọrụ.
3. mmepụta ahịrị ọsọ:
-25-35 m/min.
The Hawk High Performance Auto Cutting Line jikọtara ya na HKJ900 Multi Rip saw, Vacuum Steering Machine na HKC6 Cross Cut saw.The Hawk High Performance Auto Cutting Line dabara adaba maka ngwa ngwa dị elu, slicing ziri ezi na nhazi nke nnukwu efere, yana dabara adaba maka obere ọkpụrụkpụ ihe dị ka ala SPC dryback na ala LVT kama igwe ọkpọ.The ọhụrụ hụrụ agụba nke HKJ900 na-akpụ akpụ na onwe ime mgbanwe ngwaọrụ na-aghọta ngwa ngwa nnọchi nke agụba na ngwa ngwa ntughari nke ala nkọwapụta.The akpaka mmepụta njikọ mode nwere ike na-aghọta ọnwụ ọnwụ nke 40 mita kwa nkeji na budata ibelata mmepụta na-eri
The Hawk High Performance Auto Cutting Line:
1. Elu arụmọrụ, ọsọ bụ 15-18 pcs / min.
2.High ziri ezi, kwụ ọtọ nke panel na-achịkwa n'ime 0.05-0.10mm / m.
3.Separate Ọdịdị maka saw agụba na moto, otú ọ nwere ike ngwa ngwa na mfe ịgbanwee dị iche iche ngwaahịa nkọwa.
4.Touch ihuenyo sets, servo moto na-achịkwa ije nke saw agụba, mfe ọrụ, elu nkenke.
5.Cutting ebu adịghị mkpa, ọ nwere ike ịzọpụta na-eri na edozi oge.
6.Cut na ngwaahịa nke punch pịa enweghị ike hazie (Gụnyere kpọmkwem ngwaahịa mere site ọkpụrụkpụ, ogologo na hardness).
7.Batch usoro, obere mpaghara ọrụ.
8.Realize automation nke ngwaahịa na-aga n'ihu, belata ọnụ ọgụgụ ọrụ.
| HKJ900 | HKC6 | |
| Spindle moto ike | 5,5kw | 4.0kw |
| Hụrụ agụba moto ike | 8*5.0kw | 3*5.0kw |
| Hụrụ agụba moto ọsọ | 2500 - 5200rpm (ntụgharị ugboro ugboro) | 2500 - 5200rpm (ntụgharị ugboro ugboro) |
| Hụrụ ọnọdụ mgbanwe oghere agụba | Metụ ihuenyo dijitalụ mgbanwe | Metụ ihuenyo dijitalụ mgbanwe |
| Hụrụ ngbanwe nhazi oghere agụba | ± 0.015mm | ± 0.015mm |
| Hụrụ dayameta agụba | 300-320 mm | 300-320 mm |
| Dayameta nke oghere n'ime agụba | 140mm | 140mm |
| Hụrụ agụba ọkpụrụkpụ | 1.8-3 mm | 1.8-3 mm |
| Ndozi nso nke ịkwọ agụba ebuli | -10 - 70mm (Were ụgbọ elu na-arụ ọrụ dị ka ntụaka) | -- |
| Hụrụ agụba ebuli mgbanwe mode | Metụ ihuenyo dijitalụ mgbanwe | -- |
| Ọsọ efere ịkwọ ihe | 5 - 40m/min (ntụgharị ugboro ugboro) | 5 - 40m/min (ntụgharị ugboro ugboro) |
| Ọkpụrụkpụ efere ịwa osisi | 2-20 mm | 2-20 mm |
| Kachasị obosara nke efere saw | 1350 mm | 600mm |
| Ogologo ogologo efere ahụrụ | 500-2400mm | 2400mm |
| Nnukwu arọ nke akụrụngwa | ≈5.5T | ≈3.5T |
Ngwaahịa ndị emetụtara
-
Igwe Hawk Atọ Rip Saw
Nka nka moto ike: 3* 4KW moto nri: 1.5KW Oke ọsọ: 2980 (r / min) hụrụ agụba nkọwa: 300mmX3.2mmX2.2mmX40mm hụrụ ọsọ: Mgbanwe 15 ~ 35 (m / min) Ịgha mkpụrụ: 3-25mm Akụkụ : 1160mm * 2960mm * 1140mm arọ: 2.1 (T) The Hawk Machinery Three Rip Saw bụ nke mejupụtara ahụ zuru oke na ikpo okwu nri na ịwụpụ....